Skip to content

boards/stm32f4: migrate to new pinmap #18798

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Draft
raiden00pl wants to merge 1 commit into
base: master
Choose a base branch
from
Draft

boards/stm32f4: migrate to new pinmap #18798

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
1 change: 1 addition & 0 deletions boards/arm/stm32/axoloti/configs/nsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -9,6 +9,7 @@
# CONFIG_ARCH_LEDS is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="axoloti"
CONFIG_ARCH_BOARD_AXOLOTI=y
Expand Down
4 changes: 2 additions & 2 deletions boards/arm/stm32/axoloti/include/board.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -153,8 +153,8 @@

/* USART1 - console on header pins */

#define GPIO_USART1_RX GPIO_USART1_RX_2 /* AF7, PB7 */
#define GPIO_USART1_TX GPIO_USART1_TX_2 /* AF7, PB6 */
#define GPIO_USART1_RX (GPIO_USART1_RX_2|GPIO_SPEED_100MHz) /* AF7, PB7 */
#define GPIO_USART1_TX (GPIO_USART1_TX_2|GPIO_SPEED_100MHz) /* AF7, PB6 */

/* USART6 - midi in/out */

Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/clicker2-stm32/configs/knsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -6,6 +6,7 @@
# modifications.
#
# CONFIG_SYSTEM_DD is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="clicker2-stm32"
CONFIG_ARCH_BOARD_CLICKER2_STM32=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/clicker2-stm32/configs/mrf24j40-6lowpan/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,6 +8,7 @@
# CONFIG_DEV_CONSOLE is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_NET_IPv4 is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="clicker2-stm32"
CONFIG_ARCH_BOARD_CLICKER2_STM32=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/clicker2-stm32/configs/mrf24j40-mac/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -5,6 +5,7 @@
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="clicker2-stm32"
CONFIG_ARCH_BOARD_CLICKER2_STM32=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/clicker2-stm32/configs/mrf24j40-starhub/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,6 +8,7 @@
# CONFIG_DEV_CONSOLE is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_NET_IPv4 is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="clicker2-stm32"
CONFIG_ARCH_BOARD_CLICKER2_STM32=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/clicker2-stm32/configs/mrf24j40-starpoint/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,6 +8,7 @@
# CONFIG_DEV_CONSOLE is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_NET_IPv4 is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="clicker2-stm32"
CONFIG_ARCH_BOARD_CLICKER2_STM32=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/clicker2-stm32/configs/nsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -5,6 +5,7 @@
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="clicker2-stm32"
CONFIG_ARCH_BOARD_CLICKER2_STM32=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/clicker2-stm32/configs/usbnsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -6,6 +6,7 @@
# modifications.
#
# CONFIG_DEV_CONSOLE is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="clicker2-stm32"
CONFIG_ARCH_BOARD_CLICKER2_STM32=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/clicker2-stm32/configs/xbee-6lowpan/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,6 +8,7 @@
# CONFIG_DEV_CONSOLE is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_NET_IPv4 is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="clicker2-stm32"
CONFIG_ARCH_BOARD_CLICKER2_STM32=y
Expand Down
39 changes: 23 additions & 16 deletions boards/arm/stm32/clicker2-stm32/include/board.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -252,37 +252,37 @@
* Assuming RS-232 connverted connected on mikroMB1/12
*/

#define GPIO_USART2_RX GPIO_USART2_RX_2 /* PD6 */
#define GPIO_USART2_TX GPIO_USART2_TX_2 /* PD5 */
#define GPIO_USART2_RX (GPIO_USART2_RX_2|GPIO_SPEED_100MHz) /* PD6 */
#define GPIO_USART2_TX (GPIO_USART2_TX_2|GPIO_SPEED_100MHz) /* PD5 */

#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */
#define GPIO_USART3_RX (GPIO_USART3_RX_3|GPIO_SPEED_100MHz) /* PD9 */
#define GPIO_USART3_TX (GPIO_USART3_TX_3|GPIO_SPEED_100MHz) /* PD8 */

/* SPI
*
* SPI2 - mikroBUS2
* SPI3 - mikroBUS1
*/

#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1 /* PC12 */
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1 /* PC11 */
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_2 /* PC10 */
#define GPIO_SPI2_MISO (GPIO_SPI2_MISO_1|GPIO_SPEED_50MHz) /* PC12 */
#define GPIO_SPI2_MOSI (GPIO_SPI2_MOSI_1|GPIO_SPEED_50MHz) /* PC11 */
#define GPIO_SPI2_SCK (GPIO_SPI2_SCK_2|GPIO_SPEED_50MHz) /* PC10 */

#define GPIO_SPI3_MISO GPIO_SPI3_MISO_2 /* PB15 */
#define GPIO_SPI3_MOSI GPIO_SPI3_MOSI_2 /* PB14 */
#define GPIO_SPI3_SCK GPIO_SPI3_SCK_2 /* PB13 */
#define GPIO_SPI3_MISO (GPIO_SPI3_MISO_2|GPIO_SPEED_50MHz) /* PB15 */
#define GPIO_SPI3_MOSI (GPIO_SPI3_MOSI_2|GPIO_SPEED_50MHz) /* PB14 */
#define GPIO_SPI3_SCK (GPIO_SPI3_SCK_2|GPIO_SPEED_50MHz) /* PB13 */

/* I2C
*
* I2C2 - mikroBUS2
* I2C3 - mikroBUS1
*/

#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1 /* PB10 */
#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1 /* PB11 */
#define GPIO_I2C2_SCL (GPIO_I2C2_SCL_1|GPIO_SPEED_50MHz) /* PB10 */
#define GPIO_I2C2_SDA (GPIO_I2C2_SDA_1|GPIO_SPEED_50MHz) /* PB11 */

#define GPIO_I2C3_SCL GPIO_I2C3_SCL_1 /* PA8 */
#define GPIO_I2C3_SDA GPIO_I2C3_SDA_1 /* PC9 */
#define GPIO_I2C3_SCL (GPIO_I2C3_SCL_1|GPIO_SPEED_50MHz) /* PA8 */
#define GPIO_I2C3_SDA (GPIO_I2C3_SDA_1|GPIO_SPEED_50MHz) /* PC9 */

/* Analog
*
Expand All @@ -296,8 +296,8 @@
* mikroBUS1 ADC: PD12-MB2-PWM (TIM4, channel 1)
*/

#define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_2 /* PE9 */
#define GPIO_TIM4_CH1OUT GPIO_TIM4_CH1OUT_2 /* PD12 */
#define GPIO_TIM1_CH1OUT (GPIO_TIM1_CH1OUT_2|GPIO_SPEED_50MHz) /* PE9 */
#define GPIO_TIM4_CH1OUT (GPIO_TIM4_CH1OUT_2|GPIO_SPEED_50MHz) /* PD12 */

/* DMA Channel/Stream Selections ********************************************/

Expand All @@ -311,4 +311,11 @@

#define DMAMAP_SDIO DMAMAP_SDIO_1

/* USB OTG FS */

#define GPIO_OTGFS_DM (GPIO_OTGFS_DM_0|GPIO_SPEED_100MHz)
#define GPIO_OTGFS_DP (GPIO_OTGFS_DP_0|GPIO_SPEED_100MHz)
#define GPIO_OTGFS_ID (GPIO_OTGFS_ID_0|GPIO_SPEED_100MHz)
#define GPIO_OTGFS_SOF (GPIO_OTGFS_SOF_0|GPIO_SPEED_100MHz)

#endif /* __BOARDS_ARM_STM32_CLICKER2_STM32_INCLUDE_BOARD_H */
1 change: 1 addition & 0 deletions boards/arm/stm32/mikroe-stm32f4/configs/fulldemo/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -15,6 +15,7 @@
# CONFIG_NX_DISABLE_16BPP is not set
# CONFIG_SPI_CALLBACK is not set
# CONFIG_STM32_CCMEXCLUDE is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="mikroe-stm32f4"
CONFIG_ARCH_BOARD_MIKROE_STM32F4=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/mikroe-stm32f4/configs/kostest/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -9,6 +9,7 @@
# CONFIG_DEV_CONSOLE is not set
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_SPI_CALLBACK is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="mikroe-stm32f4"
CONFIG_ARCH_BOARD_MIKROE_STM32F4=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/mikroe-stm32f4/configs/nsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -11,6 +11,7 @@
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_SPI_CALLBACK is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="mikroe-stm32f4"
CONFIG_ARCH_BOARD_MIKROE_STM32F4=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/mikroe-stm32f4/configs/nx/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -13,6 +13,7 @@
# CONFIG_NXTK_DEFAULT_BORDERCOLORS is not set
# CONFIG_NX_DISABLE_16BPP is not set
# CONFIG_SERIAL is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="mikroe-stm32f4"
CONFIG_ARCH_BOARD_MIKROE_STM32F4=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/mikroe-stm32f4/configs/nxlines/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -15,6 +15,7 @@
# CONFIG_NX_DISABLE_16BPP is not set
# CONFIG_NX_WRITEONLY is not set
# CONFIG_SERIAL is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="mikroe-stm32f4"
CONFIG_ARCH_BOARD_MIKROE_STM32F4=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/mikroe-stm32f4/configs/nxtext/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -13,6 +13,7 @@
# CONFIG_NXTK_DEFAULT_BORDERCOLORS is not set
# CONFIG_NX_DISABLE_16BPP is not set
# CONFIG_SERIAL is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="mikroe-stm32f4"
CONFIG_ARCH_BOARD_MIKROE_STM32F4=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/mikroe-stm32f4/configs/usbnsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,6 +10,7 @@
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_SPI_CALLBACK is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="mikroe-stm32f4"
CONFIG_ARCH_BOARD_MIKROE_STM32F4=y
Expand Down
33 changes: 20 additions & 13 deletions boards/arm/stm32/mikroe-stm32f4/include/board.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -208,37 +208,44 @@
* UART2 to the expansion header.
*/

#define GPIO_USART2_RX GPIO_USART2_RX_2
#define GPIO_USART2_TX GPIO_USART2_TX_2
#define GPIO_USART2_RX (GPIO_USART2_RX_2|GPIO_SPEED_100MHz)
#define GPIO_USART2_TX (GPIO_USART2_TX_2|GPIO_SPEED_100MHz)

/* PWM
*
* The STM32F4 Discovery has no real on-board PWM devices, but the board can
* be configured to output a pulse train using TIM4 CH2 on PD13.
*/

#define GPIO_TIM4_CH2OUT GPIO_TIM4_CH2OUT_2
#define GPIO_TIM4_CH2OUT (GPIO_TIM4_CH2OUT_2|GPIO_SPEED_50MHz)

/* SPI - Onboard devices use SPI3, plus SPI2 routes to the I/O header */

#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_2
#define GPIO_SPI2_MISO (GPIO_SPI2_MISO_1|GPIO_SPEED_50MHz)
#define GPIO_SPI2_MOSI (GPIO_SPI2_MOSI_1|GPIO_SPEED_50MHz)
#define GPIO_SPI2_SCK (GPIO_SPI2_SCK_2|GPIO_SPEED_50MHz)
#define DMACHAN_SPI2_RX DMAMAP_SPI2_RX
#define DMACHAN_SPI2_TX DMAMAP_SPI2_TX

#define GPIO_SPI3_MISO GPIO_SPI3_MISO_2
#define GPIO_SPI3_MOSI GPIO_SPI3_MOSI_2
#define GPIO_SPI3_SCK GPIO_SPI3_SCK_2
#define GPIO_SPI3_MISO (GPIO_SPI3_MISO_2|GPIO_SPEED_50MHz)
#define GPIO_SPI3_MOSI (GPIO_SPI3_MOSI_2|GPIO_SPEED_50MHz)
#define GPIO_SPI3_SCK (GPIO_SPI3_SCK_2|GPIO_SPEED_50MHz)
#define DMACHAN_SPI3_RX DMAMAP_SPI3_RX_2
#define DMACHAN_SPI3_TX DMAMAP_SPI3_TX_2

/* Timer Inputs/Outputs */

#define GPIO_TIM2_CH1IN GPIO_TIM2_CH1IN_2
#define GPIO_TIM2_CH2IN GPIO_TIM2_CH2IN_1
#define GPIO_TIM2_CH1IN (GPIO_TIM2_CH1IN_2|GPIO_SPEED_50MHz)
#define GPIO_TIM2_CH2IN (GPIO_TIM2_CH2IN_1|GPIO_SPEED_50MHz)

#define GPIO_TIM8_CH1IN GPIO_TIM8_CH1IN_1
#define GPIO_TIM8_CH2IN GPIO_TIM8_CH2IN_1
#define GPIO_TIM8_CH1IN (GPIO_TIM8_CH1IN_1|GPIO_SPEED_50MHz)
#define GPIO_TIM8_CH2IN (GPIO_TIM8_CH2IN_1|GPIO_SPEED_50MHz)

/* USB OTG FS */

#define GPIO_OTGFS_DM (GPIO_OTGFS_DM_0|GPIO_SPEED_100MHz)
#define GPIO_OTGFS_DP (GPIO_OTGFS_DP_0|GPIO_SPEED_100MHz)
#define GPIO_OTGFS_ID (GPIO_OTGFS_ID_0|GPIO_SPEED_100MHz)
#define GPIO_OTGFS_SOF (GPIO_OTGFS_SOF_0|GPIO_SPEED_100MHz)

#endif /* __BOARDS_ARM_STM32_MIKROE_STM32F4_INCLUDE_BOARD_H */
1 change: 1 addition & 0 deletions boards/arm/stm32/nucleo-f401re/configs/fb/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -11,6 +11,7 @@
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="nucleo-f401re"
CONFIG_ARCH_BOARD_COMMON=y
Expand Down
1 change: 1 addition & 0 deletions boards/arm/stm32/nucleo-f401re/configs/nsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,6 +10,7 @@
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="nucleo-f401re"
CONFIG_ARCH_BOARD_NUCLEO_F401RE=y
Expand Down
47 changes: 27 additions & 20 deletions boards/arm/stm32/nucleo-f401re/include/board.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -237,11 +237,11 @@
*/

#if 1
# define GPIO_USART1_RX GPIO_USART1_RX_1 /* PA10 */
# define GPIO_USART1_TX GPIO_USART1_TX_1 /* PA9 */
# define GPIO_USART1_RX (GPIO_USART1_RX_1|GPIO_SPEED_100MHz) /* PA10 */
# define GPIO_USART1_TX (GPIO_USART1_TX_1|GPIO_SPEED_100MHz) /* PA9 */
#else
# define GPIO_USART1_RX GPIO_USART1_RX_2 /* PB7 */
# define GPIO_USART1_TX GPIO_USART1_TX_2 /* PB6 */
# define GPIO_USART1_RX (GPIO_USART1_RX_2|GPIO_SPEED_100MHz) /* PB7 */
# define GPIO_USART1_TX (GPIO_USART1_TX_2|GPIO_SPEED_100MHz) /* PB6 */
#endif

/* USART2:
Expand All @@ -251,8 +251,8 @@
* PD5
*/

#define GPIO_USART2_RX GPIO_USART2_RX_1 /* PA3 */
#define GPIO_USART2_TX GPIO_USART2_TX_1 /* PA2 */
#define GPIO_USART2_RX (GPIO_USART2_RX_1|GPIO_SPEED_100MHz) /* PA3 */
#define GPIO_USART2_TX (GPIO_USART2_TX_1|GPIO_SPEED_100MHz) /* PA2 */
#define GPIO_USART2_RTS GPIO_USART2_RTS_2
#define GPIO_USART2_CTS GPIO_USART2_CTS_2

Expand All @@ -263,8 +263,8 @@
* PA11 CN10, pin 14
*/

#define GPIO_USART6_RX GPIO_USART6_RX_1 /* PC7 */
#define GPIO_USART6_TX GPIO_USART6_TX_1 /* PC6 */
#define GPIO_USART6_RX (GPIO_USART6_RX_1|GPIO_SPEED_100MHz) /* PC7 */
#define GPIO_USART6_TX (GPIO_USART6_TX_1|GPIO_SPEED_100MHz) /* PC6 */

/* UART RX DMA configurations */

Expand All @@ -278,15 +278,15 @@
* but are normally-high GPIOs.
*/

#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2
#define GPIO_I2C1_SCL (GPIO_I2C1_SCL_2|GPIO_SPEED_50MHz)
#define GPIO_I2C1_SDA (GPIO_I2C1_SDA_2|GPIO_SPEED_50MHz)
#define GPIO_I2C1_SCL_GPIO \
(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN8)
#define GPIO_I2C1_SDA_GPIO \
(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN9)

#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1
#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1
#define GPIO_I2C2_SCL (GPIO_I2C2_SCL_1|GPIO_SPEED_50MHz)
#define GPIO_I2C2_SDA (GPIO_I2C2_SDA_1|GPIO_SPEED_50MHz)
#define GPIO_I2C2_SCL_GPIO \
(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN10)
#define GPIO_I2C2_SDA_GPIO \
Expand All @@ -297,13 +297,13 @@
* There are sensors on SPI1, and SPI2 is connected to the FRAM.
*/

#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1
#define GPIO_SPI1_MISO (GPIO_SPI1_MISO_1|GPIO_SPEED_50MHz)
#define GPIO_SPI1_MOSI (GPIO_SPI1_MOSI_1|GPIO_SPEED_50MHz)
#define GPIO_SPI1_SCK (GPIO_SPI1_SCK_1|GPIO_SPEED_50MHz)

#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_2
#define GPIO_SPI2_MISO (GPIO_SPI2_MISO_1|GPIO_SPEED_50MHz)
#define GPIO_SPI2_MOSI (GPIO_SPI2_MOSI_1|GPIO_SPEED_50MHz)
#define GPIO_SPI2_SCK (GPIO_SPI2_SCK_2|GPIO_SPEED_50MHz)

/* LEDs
*
Expand Down Expand Up @@ -367,7 +367,14 @@

#define BUTTON_USER_BIT (1 << BUTTON_USER)

#define GPIO_TIM2_CH1IN (GPIO_TIM2_CH1IN_1 | GPIO_PULLUP)
#define GPIO_TIM2_CH2IN (GPIO_TIM2_CH2IN_1 | GPIO_PULLUP)
#define GPIO_TIM2_CH1IN (GPIO_TIM2_CH1IN_1 | GPIO_PULLUP | GPIO_SPEED_50MHz)
#define GPIO_TIM2_CH2IN (GPIO_TIM2_CH2IN_1 | GPIO_PULLUP | GPIO_SPEED_50MHz)

/* USB OTG FS */

#define GPIO_OTGFS_DM (GPIO_OTGFS_DM_0|GPIO_SPEED_100MHz)
#define GPIO_OTGFS_DP (GPIO_OTGFS_DP_0|GPIO_SPEED_100MHz)
#define GPIO_OTGFS_ID (GPIO_OTGFS_ID_0|GPIO_SPEED_100MHz)
#define GPIO_OTGFS_SOF (GPIO_OTGFS_SOF_0|GPIO_SPEED_100MHz)

#endif /* __BOARDS_ARM_STM32_NUCLEO_F401RE_INCLUDE_BOARD_H */
1 change: 1 addition & 0 deletions boards/arm/stm32/nucleo-f410rb/configs/nsh/defconfig
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -9,6 +9,7 @@
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STM32_USE_LEGACY_PINMAP is not set
CONFIG_ADC=y
CONFIG_ANALOG=y
CONFIG_ARCH="arm"
Expand Down
Loading
Loading